Medicine Platform
搜索
Product Catagories
首页 > Biomedical Research > 彗星法DNA损伤分析试剂盒(3孔载玻片)
彗星法DNA损伤分析试剂盒(3孔载玻片)
单价 $583.06对比
询价 暂无
发货 Armenia
品牌 亚科因(Abbkine)产地湖北武汉
过期 长期有效
更新 2025-08-12 20:18
 
详细信息

彗星法DNA损伤分析试剂盒(3孔载玻片) | Comet Assay Kit (3-Well Slides) KTA3040

产品定位

▸ 核心产品 | 细胞分析中心 | 细胞凋亡/周期检测 ▸

检测原理

基于单细胞凝胶电泳技术(SCGE),通过PI荧光染色定量分析DNA断裂损伤。正常DNA保留于核区,断裂碎片形成彗星拖尾,损伤程度与拖尾长度/荧光强度呈正相关。

核心组分

  • • 彗星专用载玻片(3孔/片)
  • • 低熔点琼脂糖(预优化浓度)
  • • 10×裂解液 & 500 mM EDTA缓冲液
  • • 50×碘化丙啶(PI)染色液

技术优势

  • ▶︎ 3孔玻片专利设计:减少样本交叉干扰,支持平行实验对照
  • ▶︎ 免铺胶工艺:预置琼脂糖基质层,样本加载效率提升40%
  • ▶︎ 超强附着力:通过ISO 13485认证的玻片涂层技术,脱落率<0.5%

规格与交付

  • • 15T | ¥1498 | 现货(24H发货)
  • • 75T | ¥4198 | 现货(24H发货)

操作规范

  • ⚠️ 禁止混用不同批次组分
  • ⚠️ 裂解时间建议控制在1.5-2小时(25℃避光)
  • ⚠️ 电泳参数:20V/cm,30分钟(碱性缓冲液)

质控声明

每批次试剂盒通过Hela细胞阳性对照验证,提供DNA损伤梯度标准曲线(随货附电子版)。

重要警示

※ 本产品仅限科研用途,不适用于临床诊断或体内实验 ※
※ 使用前请确认实验方案符合所在地生物安全法规 ※

```

注意:以上信息可能随着产品优化升级等因素产生变动,具体信息请咨询亚科因公司。

亚科因(Abbkine)

Comet Assay DNA Damage Analysis Kit (3-Well Slides) | Comet Assay Kit (3-Well Slides) KTA3040

Product Positioning

▸ Core Product | Cell Analysis Center | Apoptosis/Cell Cycle Detection ▸

Detection Principle

Based on Single Cell Gel Electrophoresis (SCGE), DNA strand breaks are quantitatively analyzed via PI fluorescent staining. Intact DNA remains in the nuclear region, while fragmented DNA forms a comet tail. The extent of damage correlates positively with tail length/fluorescence intensity.

Core Components

  • • Comet-specific slides (3 wells/slide)
  • • Low-melting-point agarose (pre-optimized concentration)
  • • 10× Lysis Buffer & 500 mM EDTA Buffer
  • • 50× Propidium Iodide (PI) Staining Solution

Technical Advantages

  • ▶︎ Patented 3-Well Slide Design: Minimizes cross-contamination and supports parallel experimental controls
  • ▶︎ No-Gel-Coating Process: Pre-coated agarose matrix layer improves sample loading efficiency by 40%
  • ▶︎ Superior Adhesion: ISO 13485-certified slide coating technology with <0.5% detachment rate

Specifications & Delivery

  • • 15T | ¥1498 | In Stock (Shipped within 24H)
  • • 75T | ¥4198 | In Stock (Shipped within 24H)

Operational Guidelines

  • ⚠️ Do not mix components from different batches
  • ⚠️ Recommended lysis time: 1.5-2 hours (25°C, protected from light)
  • ⚠️ Electrophoresis parameters: 20V/cm, 30 minutes (alkaline buffer)

Quality Control Statement

Each batch is validated using Hela cell positive controls and includes a DNA damage gradient standard curve (electronic version provided with shipment).

Important Warning

※ For research use only. Not intended for clinical diagnosis or in vivo experiments ※
※ Ensure compliance with local biosafety regulations before use ※

Note: The above information may be subject to changes due to product optimization and upgrades. For specific details, please consult Yakoyin Company.