CS Clean Systems CS065SC Scrubber CleanSorb Dry Absorber Abatement System
SKU: 4062
Manufacturer: CS CLEAN SYSTEMS GMBH
Model: CLEANSORB CS 065 SC Scrubber (LABLINE)
..was in use for Butadiene.
YoM: 09/2004
S/N: CS24083
Description:
CLEANSORB® LABLINE
The CLEANSORB LABLINE features a small absorber column housed in a compact, air-extracted cabinet. A particular advantage for sporadic laboratory work is the passive operating principle. The LABLINE is always ready and does not have to be switched on, heated up or otherwise activated each time a new experiment is to be run.
The wide selectivity of CLEANSORB® chemisorber media to a diverse list of gases and liquid precursors, ranging from corrosive or toxic species to latest-generation metalorganic complexes, offers ideal flexibility for R&D requirements.
Your advantages:
- Negligible installation costs for laboratory environment, simple to operate
- Long column lifetime on R&D applications – low running costs
- Can be used to abate combined vent purge gases from several gas cabinets
- Front panel control and parameter display, volt-free contacts and a digital signal interface
Technical Informations:
On Top Connection for cabinet air extract ø100mm
For Compressed air: Swagelok-connector (1/4 or 6mm), 6-7 bar
For Nitrogen: Swagelok-connector (1/4 or 6mm), 6-7 bar
Gas outlet: 25-40KF
Gas inlet: 25-40KF
In-Line Cable: L1/N/PE
Pneum./CDA: 0,7 MPa
N2 high purity: 0,7 MPa
Mains: 230V @ 50/60 Hz
with installed TX-4000 KFP Gas Detector
The Cleansorb Dry Bed Absorber is in good cosmetic condition and 100% fully functional.
Comes out of running Laboratory and was tested before deinstallation.