Language
Fully Automatic Mode In full auto mode, Alignment, Focusing, Shooting and movement between the right eye and left eye are operated automatically. The operator can use with minimum training. The operator simply touches the screen to select a mode, touches the center of the pupil and presses “Capture START”. The TRC-NW400 provides consistent results regardless of operator experience. Manual Operation Mode In manual mode, the operator can drive the camera using the touch screen as if via the Control lever. This is particularly useful in cases when an operator would like to shoot a specific area of the fundus. In manual mode, all movements of the camera are adjusted by finger touch. Illumination level, flash intensity, diopter adjustment and fixation targets can also be manually regulated. Space Saving The TRC-NW400 incorporates a rotating touch panel monitor that allows the operation of the instrument from virtually any angle. This feature lets the operator be in front, behind or at either side of the patient, optimizing space saving. The TRC-NW400 can comfortably be operated when located against a wall or in a corner. Low Flash For patient comfort and compliance, a low 4.0Ws flash intensity is normally utilized, producing excellent images with low flash and reducing patient’s discomfort.
Small Pupil Photography & Zoom Function The TRC-NW400 enables the user to acquire retinal images with pupils Φ3.3mm or more, assisting functions as small pupil aperture, digital zooming function and overlayed mask. When the “small pupil mode” is selected, the camera will automatically adjust for small pupils*.
